Updated November 2026

A tow behind mower ATV setup lets you cut tall grass, brush and field edges without a dedicated tractor. The job comes down to three things: a hitch rated for the load, a mower that matches your machine’s towing capacity, and a safe hookup that keeps the mower tracking behind you on turns. This guide walks through each step so you can set up the rig correctly the first time.

Check Your ATV’s Towing Capacity First

Start with the owner’s manual. Manufacturers list a maximum towing capacity and a maximum tongue or hitch weight, and both numbers matter. Exceeding the tow rating strains the frame, the rear axle and the brakes, and it makes the ATV hard to stop on a slope. Many owners also find that a rear-mounted implement needs more rear weight to keep the front end planted, so a heavier rider or a ballast bag may be necessary. If you are unsure about your machine’s ratings, ask a dealer or a qualified service technician before you hitch anything up.

Shopping for one? See our guide: Side by Side Atv Utv (2026): Which Should You Choose?.

Choose the Right Hitch and Mower

Use a hitch that is designed for the ATV’s receiver size and rated above the mower’s loaded weight. A ball-style or pintle-style hitch is common, and the mower’s hitch point must match it. Look for a mower with a single-axle design and a locking pin or clevis, since loose connections are a frequent cause of trailers breaking free. Keep the mower light enough that you can pull it onto a trailer or lift it by hand if you need to.

Hitch, Connect and Test the Setup

  1. Park on level ground and set the parking brake on the ATV.
  2. Lower the mower hitch to the height of the ATV receiver, then back the ATV slowly until the coupler seats.
  3. Insert the locking pin and secure the retaining clip. Confirm the coupler cannot lift off the ball.
  4. Connect any safety chains in a crossed pattern under the tongue, with enough slack for turns but not enough to drag.
  5. Check the mower’s deck height, blade engagement and gearbox oil before you start.
  6. Make a slow test loop in an open area. Watch the mower’s tracking and listen for rattles or binding.

Set Safe Speeds and Turning Distances

Keep your speed low, typically well under walking pace when mowing rough ground. Make wide turns, because a trailing mower will swing outward and can tip on a tight radius. Avoid steep side slopes entirely, since the mower’s weight can push the ATV sideways.

Common Mistakes to Avoid

  • Ignoring the tow rating and hitch weight limits in the owner’s manual.
  • Using a worn or undersized hitch pin, or skipping the retaining clip.
  • Towing a mower across slopes or downhill at speed, where braking distance grows quickly.
  • Forgetting to check the mower’s blades and belts after every hookup.
  • Letting the mower hit stumps or rocks, which can bend the frame or snap the hitch.

A quality hitch pin with a retaining clip helps prevent the most common cause of mower separation on the trail. View on Amazon

A tow strap or rated recovery strap gives you a reliable way to pull the rig out of soft ground without stressing the hitch. View on Amazon

FAQ

Can any ATV tow a mower?

No. Only ATVs with a rated receiver and a towing capacity that covers the mower’s loaded weight should tow one. Check the owner’s manual before you attempt it.

Do I need a trailer brake on the mower?

Many small mowers do not have brakes, so the ATV’s brakes must handle the combined load. Consult a professional if you tow heavier implements that may require their own braking system.

How often should I inspect the hitch?

Inspect the hitch, pin and clips before every use and after any hard impact. Replace worn parts promptly.

Conclusion

A tow behind mower ATV rig works well when the hitch, weight rating and mower all match. Check your ATV’s specifications, hitch up carefully, and test the setup in an open area before you mow rough ground. Ride slowly, turn wide and keep the mower on level terrain for the safest results.

Graham Fisher

About Graham Fisher

Graham Fisher is part of our editorial team and reviews and edits our ATV, UTV/side-by-side & dirt bikes guides, checking product details against manufacturer specifications and owner feedback.