Updated November 2026
A youth ATV riding gear size chart is only useful if you know which measurements to take and how to read them. This guide shows you how to measure your child for helmets, jerseys, pants, gloves and boots, and how to check that each piece fits once it is on. Done correctly, you will order gear once and avoid returns.
Why Youth Gear Sizing Matters
Kids grow quickly, and many youth sizes overlap between brands. A helmet that rocks side to side or a chest protector that rides up can cost a rider protection in a crash. Sizing is not guesswork, so take your measurements before you shop and compare them against the specific brand’s chart, not a generic one.
Shopping for one? See our guide: Top 6 ATV Riding Gear for Youth: Picks Compared for Trail Riders.
How to Measure Your Child Step by Step
- Head circumference: Wrap a soft tape around the head about one inch above the eyebrows and around the widest part of the back of the skull. Record the number in inches or centimeters.
- Chest: Measure around the fullest part of the chest, under the arms, keeping the tape level.
- Waist: Measure at the natural waistline, where pants would normally sit.
- Inseam: Measure from the crotch to the bottom of the ankle bone while your child stands with feet about shoulder-width apart.
- Boot size: Measure foot length heel to toe while standing, then compare to the boot brand’s chart. Boot sizes often run differently from shoe sizes.
- Hand size: Measure from the base of the palm to the tip of the middle finger for gloves.
Reading the Size Chart Correctly
Once you have your numbers, match each one to the brand’s chart. Most charts list chest and waist in inches, and head size in a separate column. If your child falls between two sizes, go with the size that matches the chest or head measurement, since those areas are hardest to adjust. Pants can be shortened, but a helmet that is too large cannot be made safe by adding padding.
| Gear | Measure | Fit check |
|---|---|---|
| Helmet | Head circumference | Snug, no pressure points, minimal movement when shaking the head |
| Jersey and chest protector | Chest | Covers the torso without restricting arm movement |
| Pants | Waist and inseam | Sits at the waist, knee pads sit over the kneecap |
| Gloves | Hand length | Fingertips reach the end, no bunching when gripping |
| Boots | Foot length | Heel stays down, toes do not hit the front |
Checking Fit Before the First Ride
Have your child put on all the gear and sit on the ATV. Ask them to reach for the handlebars, lean forward and turn the head side to side. Check that the helmet does not shift and that jersey and pants stay in place. Fit can change after a few rides as gear breaks in, so recheck every few months, especially during growth spurts.
Recommended Gear
- A youth ATV helmet from a brand that lists head-circumference sizing, since helmet fit is the most important safety factor. View on Amazon
- Youth ATV boots with an ankle brace and a sole that grips the footpegs. View on Amazon
- A youth chest protector sized to the chest measurement, to cover the torso during falls. View on Amazon
Common Mistakes
- Buying a bigger size so the child can “grow into it.” Oversized helmets and boots are a safety risk now.
- Using one brand’s chart for another brand’s gear. Always check the chart that matches the product.
- Measuring over clothing or a hoodie, which adds inches that are not really there.
- Skipping the helmet fit check because the size “looks right” on a shelf.
FAQ
How do I know if a youth helmet is too big?
If the helmet moves when your child shakes their head, or it slides down over the eyes, it is too large. The padding should be snug all the way around without causing pressure points.
Should I measure my child for gear every year?
Yes, especially for kids who are growing fast. Re-measure before buying new gear and check existing pieces at the start of each riding season.
Can I buy adult gear for a teen rider?
Only if the adult size fits the measurements exactly. Many teens fall between youth and adult sizing, so check each item against the adult chart and confirm fit in person when possible.
Conclusion
Measure your child’s head, chest, waist, inseam, feet and hands, then match those numbers to the chart for each brand. Check fit by having your child sit on the ATV and move freely. For questions about protective fit for a specific rider, a local riding instructor or a qualified gear fitter can help.
Related reading
- Youth Riding Gear Size Chart: How to Measure Your Kid for ATV and Dirt Bike Gear
- Youth Quad Riding Gear: 7 Essentials to Keep Your Kid Safe (2026)
- Youth Mx Riding Gear: A Practical Guide (2026)
- Youth Horse Riding Gear: A Step-by-Step Guide for Safe Riders
- Women's Plus-Size Riding Gear: 7 Fit and Safety Steps for Larger Riders (2026)
- Warm Weather Riding Gear: 7 Essentials for Hot-Weather ATV and Dirt Bike Rides
