Updated November 2026
Rev It riding gear is a line of protective apparel designed for motorcycle and off-road riders, and choosing the right pieces comes down to fit, protection rating and how you ride. This guide walks through the six essentials to look at, how to check fit at home, and the mistakes that leave riders underprotected. Use it as a buying checklist before you put money toward a jacket, pants or boots.
Step 1: Match the Gear to How You Ride
Start with the riding you actually do. A trail rider on an ATV faces branches, roost and sudden drops, while a motocross rider needs armor and airflow for sustained effort. Rev It sells pieces across several categories, so narrow your search to the style that fits your terrain before you compare features. For a broader look at matching gear to riding style, see Rev It Motorcycle Riding Gear: 6 Essentials for Safe Rides.
Shopping for one? See our guide: 5 Best Riding Gear Motorcycles: Top Picks for Safer Rides (2026).
Step 2: Check Protection Ratings and Armor
Look for removable or built-in armor at the elbows, shoulders, knees and back. Manufacturers typically list armor standards on the product page, so read the spec sheet rather than relying on marketing terms. Pay close attention to the back protector, since spinal injuries are among the most serious crash outcomes. A chest protector is worth considering for motocross and aggressive trail riding.
Step 3: Test Fit Before You Ride
Fit matters more than brand. Protective gear should be snug without restricting movement. Try these checks while wearing the full kit:
- Stand in a riding position with knees bent and arms extended. Nothing should pinch or pull hard.
- Raise both arms overhead. The jacket should not ride up past your waist.
- Check that armor sits over the joints it is meant to protect, not on the side of them.
- Confirm boots allow full ankle flex without slipping off the heel.
Rev It publishes sizing charts for each garment, and these are worth using alongside your measurements. If you are buying for a child, see Youth Riding Gear Size Chart: How to Measure Your Kid for ATV and Dirt Bike Gear.
Step 4: Plan for Weather and Layering
Your gear should work in the conditions you ride in. Mesh or vented pieces help in heat but offer less wind and cold protection. Waterproof liners and removable thermal layers extend the season. Dress in layers so you can adjust during a long ride, and avoid cotton base layers, which hold moisture against the skin. For hot-weather strategies, read Warm Weather Riding Gear: 7 Essentials for Hot-Weather ATV and Dirt Bike Rides.
Step 5: Inspect and Maintain Your Gear
Check seams, zippers, Velcro closures and armor pockets after every few rides, especially after a crash. Replace armor that is cracked or compressed, and wash mesh and textile pieces according to the care label. Gear that has absorbed a hard impact may no longer protect as it should, so follow the manufacturer’s guidance on replacement.
Riding Gear Checklist
- Helmet certified to the standard required in your region
- Goggles or a face shield with clear visibility
- Jacket with armor at elbows and shoulders
- Pants with knee armor and reinforced seats
- Over-the-ankle boots with firm soles
- Gloves sized to allow full grip
Common Mistakes
- Buying by size chart alone without trying pieces on in riding position.
- Skipping the back protector to save on comfort.
- Wearing worn armor after a crash.
- Choosing mesh gear for cold rides.
- Ignoring boot fit, which affects braking and shifting control.
Recommended Gear
Rev It makes a range of jackets and pants that suit trail and motocross riding, and the brand is widely stocked. Look for a full kit rather than mixing unrelated brands, since matched sizing reduces gaps at the cuffs and waist.
- Rev It Enduro jacket: Suited to trail riders who want armor and ventilation in one piece. View on Amazon
- Rev It riding pants: Reinforced knees and seat for long days in the saddle. View on Amazon
- Over-the-ankle motocross boots: Firm support for braking and foot control on rough terrain. View on Amazon
FAQ
Is rev it riding gear suitable for ATV riding as well as dirt bikes?
Many Rev It pieces work for both, particularly the trail and enduro lines. Check each product’s intended use, since motocross-specific armor may be bulkier than you need on an ATV.
How do I know if my armor fits correctly?
Armor should cover the joint fully and stay in place when you move through a riding stance. If it shifts or leaves gaps, try a different size.
How often should I replace riding gear?
Replace any piece that has taken a hard impact, shows cracks or compression in the armor, or has damaged seams. Follow the manufacturer’s guidance and consult a professional fitter if you are unsure about a crash-damaged item.
Conclusion
Choosing rev it riding gear starts with matching pieces to your terrain, then checking protection and fit in riding position. Inspect your kit regularly and replace anything that has been damaged in a crash. A well-fitted set of protective gear is one of the most useful safety decisions an off-road rider can make.
