Updated November 2026

Honda dirt bike riding gear comes down to six core pieces: a helmet, goggles, boots, gloves, chest and body protection, and riding pants and jersey. Get each one sized correctly and fitted to how you ride, and you will be far better protected on the trail or track. This guide walks through what to check and in what order.

Start With the Helmet and Goggles

Your helmet is the single most important piece of honda dirt bike riding gear you will buy. Look for a helmet that carries a DOT sticker, and if you ride off road often, consider one that also meets the Snell standard. Fit matters more than brand: the helmet should sit snug all the way around, with no pressure points at the temples, and it should not move when you shake your head side to side.

Shopping for one? See our guide: 5 Best Dirt Bike Riding Gear Combo Sets for Trail and Track Riders.

Goggles should seal against your face and work with your helmet’s shape. Check that the goggle strap sits under the helmet’s rear, not over it, and that there is no gap at the nose or temples. Keep a clear lens and a tear-off system on hand for dusty days.

Fit the Body Protection Next

Chest and back protection, along with knee and shin guards, absorbs impacts that a jersey and pants cannot. Body armor should cover the chest, spine and shoulders without restricting your ability to lean forward on the bike. Try it on while standing in a riding stance, with knees bent and elbows out, and make sure nothing pinches or rides up.

Boots are the next priority. Riding boots should reach above the ankle, offer firm side support and fit with your toes just touching the front when you are standing. Check that you can shift gears and operate the rear brake comfortably while wearing them.

Layer Gloves, Jersey and Pants

Gloves protect your hands in a fall and give you a secure grip on the handlebars. Choose a pair that bends comfortably at the knuckles and the fingertips, and that lets you work the clutch and brake levers without fatigue.

Jerseys and pants should allow full range of motion. Many riders prefer pants with knee-brace compatibility and a jersey with elbow protection built in. Check the fit by standing up on the pegs and crouching low to make sure the fabric does not bunch or pull.

Gear Fit Checklist

  1. Helmet: snug all around, no movement when you shake your head.
  2. Goggles: seal against the face, strap sits under the helmet.
  3. Chest and back protection: covers the chest, spine and shoulders in a riding stance.
  4. Boots: above the ankle, toes just touch the front when standing.
  5. Gloves: full knuckle bend, secure grip on the grips.
  6. Jersey and pants: no bunching when crouched or standing on the pegs.

Common Mistakes

  • Buying gear a size too large to “grow into,” which reduces protection in a crash.
  • Ignoring helmet age and replacing it after any significant impact.
  • Wearing goggles that do not seal, leading to dust and poor visibility.
  • Skipping body armor on short rides or easy trails.
  • Failing to check boot buckles and gear straps before each ride.

A dual-sport helmet with a visor and a good goggle system covers most trail riding needs. Choose a model that fits your head shape, since helmet fit varies by manufacturer.

View on Amazon

A chest and back protector helps absorb impacts on rough terrain. Check the sizing chart against your chest measurement before you order.

View on Amazon

Riding gloves with reinforced knuckles and a secure wrist closure keep your hands protected and your grip stable on longer rides.

View on Amazon

FAQ

How often should I replace my helmet?

Manufacturers generally recommend replacing a helmet every five to ten years, depending on use and storage. Replace it immediately after any crash or hard impact, even if no damage is visible.

Can I use motorcycle gear for dirt biking?

Some street motorcycle gear works for light trail riding, but dirt-specific gear is designed for the movement and impact patterns of off-road riding. Consult a professional rider or gear fitter if you are unsure what suits your riding style.

How do I know if my gear fits correctly?

Test each piece in a riding stance, with knees bent and arms extended, and check for pinching, gaps or excess movement. If anything shifts or restricts you, try a different size or style.

Conclusion

Honda dirt bike riding gear works best when every piece fits properly and suits how you ride. Start with the helmet and goggles, then add body protection, boots, gloves and riding apparel. Check fit before every ride, and replace anything damaged in a crash.

Lauren Holland

About Lauren Holland

Lauren Holland is part of our editorial team and reviews and edits our ATV, UTV/side-by-side & dirt bikes guides, checking product details against manufacturer specifications and owner feedback.