Updated November 2026

Motor bike riding gear protects your head, body and hands when a ride goes wrong, which on trails and tracks happens more often than most riders expect. This guide walks through the core pieces of motor bike riding gear, how to check fit on each one, and the mistakes that leave riders exposed. By the end, you will know what a complete kit includes and how to tell whether each item is doing its job.

Start With a Properly Fitted Helmet

The helmet is the one piece of motor bike riding gear you should never compromise on. Look for a DOT-marked helmet, which is the standard required for on-road and off-road use in the United States. Fit matters more than brand. Put the helmet on, fasten the strap, and try to rotate it front to back while holding it by the brim. If it moves independently of your head, it is too large. Your cheek pads should press evenly, and the padding should not shift when you shake your head side to side.

Shopping for one? See our guide: Protective Gear for Bike Riding: 7 Best Picks Compared (2026).

Protect Your Eyes, Hands and Feet

Goggles keep dirt, branches and wind out of your eyes, and they matter even on overcast days. Choose a lens tint suited to the light you ride in most, and carry a spare lens or tear-off set if your trails are dusty. Gloves should be snug without restricting your fingers, and they should cover the knuckles fully. Boots need to be stiff enough to support your ankles and firm enough to hold the shifter and brake pedal feel steady. Check that the boot fits with your riding socks on, not the thin socks you wore to the store.

Quick fit checklist

  1. Helmet: no movement when you twist it, cheek pads snug, strap snug under the chin.
  2. Goggles: seal tight around the face, no gaps at the nose, strap sits flat.
  3. Gloves: fingertips reach the end without bunching, grip is comfortable with the handlebars.
  4. Boots: ankle support firm, toes do not hit the front, calf clears the shin guard.

Add Body Protection

A chest protector, jersey and pants form the second layer of motor bike riding gear. Chest protectors should cover the sternum and upper ribs, and you should be able to sit forward on the tank without the front edge digging in. Jerseys and pants should allow full range of motion when you stand on the pegs. Knee braces, while optional for many riders, are worth considering if you ride aggressive terrain. Check manufacturer size charts before buying, because sizing varies between brands.

Build Your Kit Around How You Ride

Trail riders often want lighter, more breathable layers and a helmet with more ventilation. Motocross and track riders typically need more impact protection and a helmet built for higher speeds and harder landings. Use the list above as your starting point, then adjust based on where and how fast you ride. Check your gear after every crash, and replace any helmet that has taken a significant impact, following the manufacturer’s guidance.

Common Mistakes

  • Buying a helmet a size too large because it feels roomy in the store.
  • Wearing gear that has never been fitted to your body position on the bike.
  • Skipping goggles or using clear lenses in bright conditions.
  • Ignoring damage to padding or shells after a fall.
  • Choosing boots that feel comfortable walking but restrict ankle movement when riding.

A well-fitted helmet is the most important purchase, and many riders start with a DOT-certified model from an established off-road brand. Goggles with a dual-pane or anti-fog lens help maintain visibility on dusty and humid days. Riding boots designed specifically for motocross or off-road use give the ankle support that regular hiking boots lack. View on Amazon View on Amazon View on Amazon

FAQ

How do I know if my helmet is the right size?

Put it on, fasten the strap, and try to twist it with your hands on the brim. If it rotates independently of your head, go down a size. Check the manufacturer’s sizing chart, since fit varies between brands.

Do I need a chest protector for trail riding?

Many trail riders use one, especially on rocky or technical terrain where falls are common. Choose a lighter model with good ventilation if you ride in warm weather.

When should I replace my riding gear?

Replace a helmet after a significant impact, and follow the manufacturer’s guidance on age and wear. Retire any gear with cracked shells, torn padding or broken closures.

Conclusion

A complete motor bike riding gear setup covers your head, eyes, hands, feet and torso, and each piece needs to fit your body and riding style. Check fit before every new purchase and inspect your kit regularly. For specific sizing or medical concerns, consult a professional fitter or your physician.

Lauren Holland

About Lauren Holland

Lauren Holland is part of our editorial team and reviews and edits our ATV, UTV/side-by-side & dirt bikes guides, checking product details against manufacturer specifications and owner feedback.