Updated November 2026

Jericho ATV Park NH is a trail destination in New Hampshire that draws riders looking for organized, purpose-built terrain. This guide covers how to plan a visit, prepare your machine and gear, and ride with a group in a way that keeps everyone safe. By the end, you should know what to check before you leave home and how to make the most of a day on the trails.

Plan Your Visit Before You Load the Trailer

Start by confirming the basics with the official source. Operating hours, seasonal openings, trail status, and any ticket or registration requirements can change from year to year and sometimes week to week. Check the park’s official site or call ahead to confirm availability before you commit to a long drive.

Shopping for one? See our guide: Side by Side Atv Utv (2026): Which Should You Choose?.

Once the day is confirmed, decide how much riding you can realistically handle. Many riders overestimate their stamina in the first hour and run out of focus by midday. Plan shorter loops, build in breaks, and save the most technical sections for when you are warm and alert.

Prepare Your ATV or Side-by-Side

Mechanical problems are the most common reason a trip ends early. A short inspection at home prevents most of them. Pay particular attention to tires, brakes, and fluids, since these take the most abuse on rocky and muddy trails.

  1. Check tire pressure and inspect the sidewalls for cuts or bulges. Set pressure to the range listed in your owner’s manual for your load and terrain.
  2. Test both brakes and the throttle return before leaving the driveway.
  3. Check engine oil level and coolant (if applicable), and confirm there are no visible leaks.
  4. Inspect the chain or drive belt, and confirm the air filter is clean.
  5. Charge your phone and pack a basic tool kit, a tire repair kit, and a tow strap.

Gear Up for New Hampshire Trail Conditions

New Hampshire weather changes quickly, especially in spring and fall. Dress in layers you can remove as temperatures climb, and always wear a DOT-compliant helmet, eye protection, over-the-ankle boots, gloves, and long sleeves and pants. Riders under 18 should follow the size and fit guidance in our youth gear articles, since a poor fit reduces protection.

Plan for muddy or wet sections even if the forecast looks dry. Trails that are firm in the morning can turn soft by afternoon, and water crossings may be deeper than they appear.

Ride as a Group Without Losing Anyone

Group riding is where most trail accidents and lost-rider situations begin. Agree on a lead rider and a sweep rider before you start, and keep a gap of several machine lengths between riders on tight trails. Stop at every trail junction so the group can regroup, and never assume someone behind you knows which way to go.

Establish hand signals for stopping, obstacles, and trouble. If a rider goes down, the group should stop, check on them, and move the machine off the trail before attempting to restart it.

Ride Within Your Limits

Trails are designed with varying difficulty. If a section looks beyond your skill level, walk it first or take the easier route. Pushing past your limits is how most injuries happen.

Common Mistakes to Avoid

  • Skipping the pre-ride inspection because the machine ran fine last time.
  • Riding without a charged phone or a plan for where to meet if the group separates.
  • Wearing gear that fits loosely or has been damaged in a previous crash.
  • Following the rider in front too closely on rough or wet terrain.
  • Underestimating how much water and food you will need over a full day.
  • Tire repair kit: A compact plug kit lets you fix a punctured tire on the trail instead of walking out. View on Amazon
  • Tow strap: Useful for recovering a stuck machine or assisting a rider who has lost power. View on Amazon
  • Hydration pack: Keeps water within reach so you drink regularly without stopping. View on Amazon

FAQ

Do I need a specific permit or registration to ride at Jericho ATV Park NH?

Requirements can vary, so confirm current rules, registration, and any required paperwork with the park before your visit. Bring your machine’s registration and any documents the park asks for.

What gear is required for riding at the park?

At a minimum, a DOT-approved helmet, eye protection, over-the-ankle boots, gloves, and long sleeves and pants are recommended for every rider. Check the park’s official rules for any additional requirements.

Is Jericho ATV Park NH suitable for beginners?

Beginners can ride successfully if they start on easier sections, ride with an experienced group, and stay within their skill level. Riders who are new to trail riding should consider a guided introduction or a lesson before tackling advanced terrain.

Conclusion

A good day at Jericho ATV Park NH starts well before you arrive. Confirm details with the official source, inspect your machine, and dress for changing New Hampshire conditions. Ride as a group with clear communication, and you will get the most out of the trails while keeping yourself and your riding partners safe.

Graham Fisher

About Graham Fisher

Graham Fisher is part of our editorial team and reviews and edits our ATV, UTV/side-by-side & dirt bikes guides, checking product details against manufacturer specifications and owner feedback.