Updated November 2026
A fox riding gear youth size chart is only useful if you measure your child correctly first. This guide walks you through the measurements that matter, how to compare them against the manufacturer’s chart, and what to do when your child falls between sizes. Taking ten minutes to measure properly prevents loose helmets, restrictive jerseys and boots that slide around on the pegs.
Why Fox Youth Sizing Differs From Adult Sizing
Youth gear is cut for a narrower frame and shorter torso, so a child’s adult-small jersey will not fit the same way. Fox publishes its own youth charts, and sizes do not map cleanly onto other brands. Always use the chart for the specific item you are buying, since helmet, jersey, pant and boot charts measure different body points. Youth sizes are also tied to age ranges, but growth varies, so measurements should override age.
Shopping for one? See our guide: 6 Best Youth Riding Gear Sets for Motocross and Trail Riders.
Step-by-Step: Measuring Your Child
Have your child stand relaxed, wearing a thin layer of clothing rather than a bulky hoodie. Use a soft tape measure and keep it snug but not tight.
- Head circumference: Wrap the tape about one inch above the eyebrows and around the widest part of the back of the head. This is the number that matters most for helmets.
- Chest: Measure around the fullest part of the chest, under the arms, with arms relaxed at the sides.
- Waist: Measure at the natural waistline, where the torso bends.
- Inseam: Measure from the crotch down the inside of the leg to the top of the ankle bone.
- Foot length: Have your child stand on a sheet of paper, mark the heel and longest toe, and measure the distance. Boots are sized to this figure, not shoe size.
- Height and weight: Record these as a backup, since some charts use them as a cross-check.
Matching Measurements to the Fox Chart
Once you have your numbers, open the Fox youth chart for the category you need and compare each measurement to the listed range. Use the table below as a quick reference for what to check against each item.
| Gear item | Primary measurement | Fit check |
|---|---|---|
| Helmet | Head circumference | Snug with no pressure points; cheek pads touch |
| Jersey | Chest and height | Room to bend forward without pulling at the shoulders |
| Pants | Waist and inseam | Sits at the waist, with knee armor centered on the kneecap |
| Boots | Foot length | Toes do not touch the front when standing on the pegs |
| Gloves | Hand length | Fingers reach the tips without bunching |
If your child measures between two sizes, choose based on the item. Helmets should never be sized up, because a loose helmet can shift in a crash. Jerseys and pants can be a touch roomier for movement, but check that the knee and elbow armor still sits over the joints. For more on protective fit, see Youth Protective Riding Gear: 6 Essentials for Safe ATV and Dirt Bike Rides.
Checking Fit on the Machine
A chart only tells you part of the story. Have your child sit on the ATV or dirt bike with the gear on and reach for the controls. Check that the boots allow the rider to stand on the pegs with knees slightly bent, and that the jersey does not ride up at the waist when reaching forward. Helmet straps should close with the chin cup snug, and you should be able to fit one finger between the strap and the chin. For a broader look at building a kit, read Youth Quad Riding Gear: 7 Essentials to Keep Your Kid Safe (2026).
Recommended gear
A flexible tape measure and a basic foot-length sheet are the only tools you need for the measurements above. Keep your child’s numbers written down so you can compare them when a new season’s gear is released.
- A soft, flexible tape measure lets you wrap the head and chest accurately without the tape slipping.
- Printed fox riding gear youth size chart reference sheets from the manufacturer let you compare numbers at the store or online. View on Amazon
Common mistakes
- Sizing by age instead of measurement, which often leads to gear that is too big or too small.
- Measuring over a thick hoodie or padded layer, which inflates the chest and waist numbers.
- Buying a helmet one size up to allow for growth, which compromises protection.
- Mixing brands and assuming a Fox medium matches another company’s medium.
- Skipping the on-bike fit check after the gear arrives.
FAQ
Should I size a youth helmet up for growth?
No. A helmet that is too large can move during a crash and reduce protection. Buy the size that fits your child’s current head circumference and replace the helmet when it no longer fits.
What if my child’s measurements fall between two sizes?
Choose the size based on the item. Helmets should fit snugly, while jerseys and pants can be slightly roomier if armor still sits over the joints. When in doubt, contact the manufacturer or a local shop for guidance.
Do I need to measure again each season?
Yes, especially for kids in growth years. Measure at the start of each riding season, since a child can change a size or more in a single year.
Conclusion
Measure head, chest, waist, inseam and foot length, then match those numbers to the Fox chart for each item. Confirm the fit on the machine before the first ride. Correct sizing is one of the simplest ways to improve protection and comfort for a young rider.
