Lauren HollandBy Lauren Holland

Updated November 2026

Husqvarna motorcycle riding gear covers everything you wear on the bike, from helmet and goggles to boots, chest protection and riding pants. This guide walks you through how to size and select each piece for a Husqvarna dirt bike or dual-sport, what to check before you ride, and how to keep your kit working season after season. By the end, you will have a clear checklist you can use in any shop or online.

Start With the Riding Style and Machine

Before you buy anything, define how you ride. A Husqvarna motocross or enduro machine places different demands on your body than a dual-sport or a trail-focused bike. Motocross riders need strong impact protection and airflow, while enduro and trail riders often need more abrasion resistance, comfort over long days and gear that works with a hydration pack.

Shopping for one? See our guide: 5 Best Riding Gear Motorcycles: Top Picks for Safer Rides (2026).

Think through these questions:

  • Will you mostly ride closed tracks, open trails or a mix?
  • How many hours do you expect to ride per session?
  • What temperatures will you face most often?
  • Do you ride alone or with a club group where you may need to carry extra items?

Your answers will shape the gear list that follows. If you are new to off-road riding, our piece on Sport Motorcycle Riding Gear: A Step-by-Step Guide for Beginners covers the basics of building a first kit, and Trail Riding Gear Dirt Bike: 5 Best Picks for Trail and Track (2026) is useful once you know your terrain.

Choose a Helmet That Fits Correctly

The helmet is the single most important piece of husqvarna motorcycle riding gear. Fit matters more than brand or graphics, so begin there.

How to Measure Your Head

  1. Wrap a soft tape measure around your head about one inch above your eyebrows and ears.
  2. Note the measurement in centimeters or inches and compare it to the manufacturer’s size chart, since sizes differ between brands.
  3. If you fall between two sizes, try the smaller one first. Helmet padding compresses over time, so a snug fit at the store usually feels right after a few rides.

Fit Checks

  • The helmet should sit level, not tilted back or forward.
  • Cheek pads should press evenly on both sides when you move your head.
  • With the chin strap fastened, you should not be able to pull the helmet off by hand.
  • Open your mouth wide. You should feel the cheek pads grip, but not cause pain.

Look for a helmet with a DOT rating for the US market. Many riders prefer an MX-style helmet with a peak for trail and motocross use, while dual-sport riders sometimes choose an adventure-style helmet with a visor that handles wind and weather better.

Eye Protection: Goggles, Visors and Lenses

Dust, mud, branches and insects all reach the eyes on a trail. Goggles with a sealed foam liner keep debris out, and a roll-off system lets you clear a dirty lens without stopping. Carry spare lenses or tear-offs, and choose a tint that matches the light you ride in most. Clear or light tints suit overcast days and forest trails, while darker tints work better in bright sun.

Boots, Gloves and Hand Protection

Off-road boots should cover the ankle, protect the shin and provide enough grip on the pegs. Check that the sole is stiff enough to support your foot when standing and that the buckles or straps close securely without pinching. Try boots on with the socks you plan to ride in.

Gloves are your primary contact with the controls. Choose a pair with reinforced palms and knuckles, and make sure your fingers reach the end without bunching. Test grip by holding the clutch and brake levers for a minute. Your hands should not tire quickly.

Body Armor: Chest, Back and Elbows

Chest protectors and back armor reduce the risk of serious injury from falls and impacts. Look for armor that meets current CE or equivalent impact standards and fits snugly without restricting breathing. Elbow and knee guards add protection where crashes most often cause abrasions and fractures. Many riders wear a neck brace or collar as well, which is worth considering for jumps and motocross.

Pants, Jerseys and Layering

Riding pants should be abrasion-resistant and wide enough to move in while standing on the pegs. Jerseys with vented panels help with airflow on hot days, while thicker mesh or fleece layers work in cooler weather. Use a base layer that wicks sweat away from the skin. Avoid cotton, which holds moisture and chills you once you stop.

  • Full-face MX helmet: A sealed, ventilated helmet suited to motocross and trail use, which gives the best protection in a fall. View on Amazon
  • Sealed MX goggles with roll-off system: Keeps dust and mud out of your eyes and lets you clear the lens quickly on the trail. View on Amazon
  • Off-road riding boots: Provide ankle support, shin protection and reliable grip on the pegs and shifter. View on Amazon
  • Chest and back protector: Adds impact protection to the torso for motocross and enduro riding. View on Amazon

Pre-Ride Gear Checklist

Run through this list before every ride:

  1. Helmet fastened, with no loose padding or cracks in the shell.
  2. Goggles clean, with a spare lens or tear-off ready.
  3. Boots buckled, laces tucked and soles free of mud packed into the tread.
  4. Gloves on, with no torn seams at the knuckles.
  5. Chest and back protection positioned correctly and secured.
  6. Pants and jersey free of rips that could expose skin.
  7. Hydration pack or water bottle filled, if you carry one.

Gear Maintenance and Replacement

Gear that looks fine can still fail. Helmets should be replaced after any significant impact, following the manufacturer’s guidance, and many brands recommend replacement after several years regardless of use because the materials degrade. Clean goggles with mild soap and water rather than harsh solvents. Air out boots after muddy rides and remove insoles to dry them fully. Check armor straps and fasteners for wear, and wash riding pants and jerseys according to the care label to keep the vents and seams intact.

Common mistakes

  • Buying a helmet a size too large because it feels comfortable in the store, then finding it shifts on the trail.
  • Choosing gloves that are too tight, which restricts circulation and fatigues the hands.
  • Skipping armor on short rides, which is when many riders take their first hard fall.
  • Wearing cotton base layers on cold or wet rides, where they trap moisture.
  • Ignoring a cracked helmet shell or damaged goggle strap because the gear still seems usable.

Tips for Getting the Most From Your Kit

  • Try gear on while wearing the riding boots and base layers you actually use.
  • Keep a small repair kit with zip ties, a spare goggle strap and tear-offs in your bag.
  • Store helmets out of direct sunlight, since UV exposure can weaken the shell over time.
  • Ask at your local Husqvarna dealer or a riding shop for a fit session if you are unsure of sizing.

FAQ

Do I need Husqvarna-branded gear to ride a Husqvarna bike?

No. Husqvarna motorcycles accept any standard riding gear. What matters is that each piece fits you properly and meets recognized safety standards. Brand choice is a matter of fit and preference.

How often should I replace my helmet?

Replace it immediately after a significant impact, even if the damage is not visible. Many manufacturers also recommend replacement every few years because the foam and materials age. Check the manufacturer’s guidance for your model.

What is the most important piece of gear for beginners?

A properly fitted helmet comes first, followed by goggles and boots. These three items protect against the most common injuries in off-road riding.

Can I use dual-sport gear for motocross?

Some dual-sport gear works well for trail riding, but motocross demands more impact protection and airflow. Check that any gear you use for motocross meets the impact standards it is marketed for.

How do I know if my gear still fits after a season of riding?

Foam padding compresses and leather or synthetic materials can stretch. Retest your helmet fit, check that boots still lock your ankle in place, and confirm that armor sits firmly against your body.

Should I wear a neck brace?

Many riders use a neck brace for motocross and jumps because it reduces stress on the neck during falls. It is a personal decision, so discuss it with a riding instructor or medical professional if you have questions about your risk.

Is riding gear waterproof?

Some pants and jackets are water-resistant, but few are fully waterproof. For rain riding, a separate rain suit over your base layers is more reliable. Consult the manufacturer’s specifications for the level of weather protection each item offers.

Conclusion

Good husqvarna motorcycle riding gear starts with a helmet that fits, then builds out to goggles, boots, gloves and protection suited to how you ride. Check your kit before every session and replace anything that has taken a hard impact or shows structural wear. If you are unsure about sizing or safety ratings for a specific piece, a qualified riding instructor or gear fitter can help you make the right call.

Ready to choose one?

Lauren Holland

About Lauren Holland

Lauren Holland is part of our editorial team and reviews and edits our ATV, UTV/side-by-side & dirt bikes guides, checking product details against manufacturer specifications and owner feedback.